Laminate flooring is commonly referred to as floating wood tile, and it is a synthetic flooring product made up of several layers fused through lamination.
Laminate flooring has grown popular in recent days because of its ease of installation and maintenance. For the same reason, it is being used on walls in addition to it being elegant.
Here is a complete guide on how to install and care for laminate flooring on walls;
How To Install Laminate Flooring On Walls
Laminate flooring is the right step to take towards making your home much more comfortable and pleasant.
Before you start the installation, you need to ensure that the walls are flat so that the flooring is not crooked. You also have to turn off the power when working around outlets or light switches.
- Measure the length and width of the wall to get the area needing to be covered and the amount of laminate flooring you would require. Get 10% more to account for errors in cutting.
- Remove the baseboard from the wall and start tracing the studs using an electronic stud finder.
- Mark the vertical lines all over the studs since you will need to work with them.
- Before you begin the installation, check every plank keenly for damage. In case it is cracked or broken, do not use it.
- Lay the planks on the floor below the wall with the decorated side up.
- Put together the short ends and measure the bottom row. Ensure the planks fit the wall, and then cut it, leaving a 3/16 inch gap to the next wall.
- Carefully flip the plant over, ensuring that it stays straight, well-aligned, and all the edges are square and tight. If the wall is big, you might need help with flipping the plank.
- Apply a layer of 100% Silicon adhesive caulk to the tongue side of the plank.
- Carefully tilt the planks towards the wall with the glued side facing the wall, ensure it is levelled, and then press it firmly to the wall.
- Drive a brad nail through the extended groove on the planks into the wall studs. Ensure the brad nail heads are not raised, but they should not go all the way through to allow for easy installation of the subsequent layer.
- Start to fit the second row from the right side. Fit the plank into the groove by angling and wiggling it into place.
- Drive a brad nail through the extended groove on the planks into the wall studs.
- You will modify the second-row plank by cutting off the short end tongue with a utility knife to get a square end. This modification will allow the pieces to fit into each other perfectly, making for a much better look.
- Apply silicone adhesive caulk along the tongue side of the plant in an “S” pattern and tilt the boards into place.
- Tighten the joints to get the best look using a tapping block, then drive a brad nail through the extended groove on the planks into the wall studs.
- Repeat this up to the last row of the wall. For inside corners and ceiling, you should use quarter round boards.
- Use painter’s tape to mark the stud for the final row’s nailing. Then, cut the planks to fit in the required width and finish it as you did the rest.
How To Care For Your Laminate Floored Walls
Laminate flooring is made solid and durable, but you need to take good care of it to ensure it lasts long. Here are some tips on how to take care of laminate flooring on your wall;
- Dry wiping should be the primary cleaning method. The planks can resist small amounts of moisture, but you must never get them wet. You can occasionally add some water to the duster to make it cleaner.
- Wipe off any spills as soon as they happen. Do not let the spills stay on the wall for more than 30 minutes since they will get into the planks and cause buckling, which will ruin the décor.
- Never wet wash the planks; never use detergents, soaps, waxes, polishes or abrasives on the surface.
- If you need to get stains out, use 1 cup of vinegar in a gallon of water or 1/3 cup of ammonia in a gallon of water.
- Do not hang objects such as pictures and television mounts on the laminate. Instead, drill a hole through the laminate flooring and mount the objects on the wall studs. The hole should be larger than the fastener used to ensure it doesn’t affect the planks.
How To Deal With A Damaged Laminate Flooring Plank
You might take good care of your wall but still, end up getting some damages due to accidents. Another problem that could cause the need for repair is buckling.
This occurs when the planks don’t have enough space to expand and contract with temperature variations.
Solving this problem depends on the cause. You need to figure out the cause of the buckling, fix it then replace the damaged planks. Here are several reasons that could cause buckling and how you can fix them;
Water could have seeped into the laminate flooring through the wall or floor when the water floods. This accumulation of water could cause the planks to swell up and ruin your décor.
To prevent this, ensure that all the piping is thorough and the walls are wiped clean. Also, keep water away from the walls.
If you have the wall installed in the kitchen or at any high-risk location, you should add water-resistant glue to protect the planks.
Movement restrictions and floatation
This will come about when the planks are fitted too closely together. There should be an expansion gap in between the planks to deal with this problem. The hole will allow the planks to expand when it gets hot without bending.
If the wall gets buckled, remove the affected area after solving the problem and replace it with a new part. Before you complete reinstallation, check to ensure that all the locking mechanism is in place.
Advantages Of Laminate Flooring On Walls
Laminate flooring would look amazing on any wall, be it residential or business. If you are considering going in this direction, then here are some factors that should help you make the decision;
Laminate flooring is robust, durable and scratch-resistant surface
These aspects come together to make it highly durable and best suited for a place with a lot of traffic or a house with children and or pets.
Tough external layers protect it; this will go a long way in keeping good looks without needing repairs. Compared to paint, this is a much better choice.
It is easy to install
Compared to other flooring options, laminate floors are easy to install, and most people can even do it independently. This is because the planks are designed to interlock, which makes them easy to work with.
You can float it over the existing wall, which will save a lot of time compared to other options requiring you to remove the previous décor. So, again, this will save on your time and money.
It is cheaper than traditional hardware
Laminate flooring has a fantastic look and quality with amazingly low prices. There are many laminate flooring choices for every price range to ensure you cut down on your budget.
It is versatile
This means that it can be installed on any wall, whether concrete or any other existing final walls. It is also sold in a wide range of stone, wood and tile finishes.
All of the products are available in different colours, thicknesses, plank styles and surface treatments. You will therefore be able to get a product that is perfect for you.
Laminate is easy to clean
The surface is both moisture and stain resistant which makes it easy to clean and maintain. All you need to do is wipe the surface, and it will be good as new.
It has no spaces to trap dust or any other foreign material. This makes it hypo-allergic, and its lower side has a moisture barrier which makes it mould resistant.
Installing Laminate flooring on walls is a simple process that most people can do. The vital part is nailing the planks onto the studs in the wall and keeping them well aligned.
Leave some space for the planks to expand and contract during major temperature changes. Make sure you install the laminate in a place that will not have a lot of water.
They are moisture-resistant but cannot handle a lot of water. Laminate flooring is a fantastic option for your wall, and it easy to maintain, so get your décor upgraded now.